Nowadays, the application range of acid proof pump is more and more extensive, and in order to use the acid proof pump better, it is necessary to pay attention to the maintenance of the acid proof pump, especially the cleaning. Let's talk about how to clean the acid proof pump in detail.

For acid proof pumps, proper cleaning will help maintain the service life of the pump and reduce unnecessary losses. But it should be clear that the acid proof pump cannot be disassembled at will during the service period, so at this time only its surface contaminants can be removed.

Once the time exceeds the warranty period, the acid proof pump can be disassembled and cleaned easily, but it should be noted that no scratches or scratches appear on the end face during the cleaning process. It will not cause rust; and the vertical mid-section of the pump casing should avoid cleaning as much as possible; in addition, the impeller parts and cooling water pipes must be cleaned.

After the completion of the installation and use of the equipment, if it is a stainless steel pipeline centrifugal pump, it is required that the drive shaft and the pump shaft, the drive shaft and the transmission shaft should be connected in accordance with regulations, and do not arbitrarily change later. If the stainless steel chemical centrifugal pump is installed, the focus is on the sliding bearing. It must be closely attached to the bearing seat, and the distance between them should be controlled within 0.02-0.04mm to ensure the maximum Improve the working efficiency of stainless steel chemical centrifugal pumps.

There are also some stainless steel single-stage centrifugal pumps and stainless steel horizontal multi-stage centrifugal pumps. Generally, when they stop running, they must first close the inlet valve of the pump; wait for the machine to cool before closing other valves. If there are no special requirements, the pump should always be filled with liquid and should be kept in a normally open state.

acid proof pump https://www.luolintec.com/FWY-type-wear-resistant-submerged-pump.html